Series 35 Ultrasonic Thickness Gages

 

These versatile handheld models make accurate and repeatable thickness measurements on parts where access to the opposite surface is difficult or impossible. They can also calculate and display Material Sound Velocity or Time-of-Flight to determine material characteristics. Measurements are instantly displayed as large numerals on the backlit display.

 

An optional Live Waveform Mode on all models allows the operator to view ultrasound waveform (or A-scan) real-time while making measurements on parts with complex geometries. In addition, an Adjust Mode allows the operator to make transducer setup adjustments to maximize measurement performance in challenging applications. A Freeze Mode instantly freezes the display to capture critical thickness measurements.

 

An important benefit of these gages is their versatility to make accurate thickness measurements on metals, plastics, glass, rubber, castings, fiberglass, and composites in a wide variety of shapes, sizes, and geometries. The Models 35 and 35DL can measure steel as thin as 0.006” (0.15mm) and as thick as 25” (500mm). Plastic can be measured down to 0.003” (0.08mm). The Models 35HP and 35DLHP are uniquely designed for materials such as fiberglass, composites, rubber, and castings that are difficult or impossible to measure using standard ultrasonic gages. They measure from 0.050” to 20” (1.25 to 500mm).

 

A unique feature, Application Auto-Recall, allows the operator to select and recall any of the stored standard or custom transducer setups in the gage’s memory. This permits easy switching among a variety of contact, delay line, and immersion transducers to solve an almost infinite number of measurement problems. In addition, a host of other features such as Alarm Mode and Differential Mode evolve these gages ideal for many difficult applications.

 

The 35DL and 35DL-HP feature a file based alphanumeric internal data logger that allows the operator to store, recall, and transmit thickness measurements with Identification Codes.

 

Download pdf Brochure (657 kb)

  • Replacement for 25, 25DL, 25HP, 25HPV, 25DLHP, 25DLRR

  • Same case as MG2 (Color Blue, one transducer connector)

  • Same user interface as MG2

  • USB communication

  • All Gages can measure Thickness, Velocity or Time of Flight

  • Direct USB 35PcScope interface

  • All units can upload/download transducer setups to Gageview or 35Pcscope

  • Reduction Rate available on all units as a special DIFF mode

  • Quick setup for first four user setups

Improvement

  • Same stored transducer setups for Standard (35 and 35DL), HP Units (35HP and 35DLHP)

  • Double the measurement rate up to 20 Hz

  • None volatile Default and Custom transducer setups

  • MG2-DL datalogger (DL models)

  • Two way communication of transducer setups

  • Improved user interface

  • USB communication

  • Direct measurement of  Thickness Velocity or Time of flight

  • Reduction Rate DIFF mode

35

  • MG2 User Interface

  • Can be upgraded to any 35 model

  • Mode 1, 2 and 3

  • Transducer frequency range 2.25-30 MHz

  • Default setups M116, M112, M110, M106, M109, M1016, M1036, M208, M202,V260 M201, M206, M207

  • 10 custom setup locations

35HP

  • MG2 User Interface

  • Can be upgraded to any 35 model

  • Transducer frequency range 0.5-5 MHz

  • Default setups M110, M106, M109, M1036, M101, M102, M103, M201, M206, M207, M2008, V153, V154, V156

  • 10 custom setup locations

35DL

  • MG2 User Interface

  • Transducer frequency range 2.25-30 MHz

  • Default setups M116, M112, M110, M106, M109, M1016, M1036, M208, M202,V260 M201, M206, M207

  • 20 custom setup locations

  • Same Datalogger as MG2-DL

  • Quick setup for first four user setups

  • RS-232 optional output

35DLHP

  • MG2 User Interface

  • Transducer frequency range 0.5-5.0 MHz

  • Default setups M110, M106, M109, M1036, M101, M102, M103, M201, M206, M207, M2008, V153, V154, V156

  • 20 custom setup locations

  • Same Datalogger as MG2-DL

  • Quick setup for first four user setups

  • RS-232 optional output

 

RS-232 Option

- Communicate with serial port printer, digital caliper, barcode reader

- Same output formats as 25DL for integration into systems built around 25DL series

Reduction rate

- User Select what is shown in Large font Reduction or Thickness

- Both values stored on DL models

 

 

Power

- Use 3 AA, alkaline or nickel metal hydride batteries

- External charger available for NMH with 15 min recharge time

- USB based AC adapter

- Battery life indicator selection switch Alkaline or NMH

Waveform Options

Velocity Mode

- User enters Ref value with direct velocity readout

 -Optional Caliper for Ref Thickness required RS-232

 

Time of Flight Mode

 

 

35Pcscope

  • Direct USB communication

  • Import/Export Transducer Setups

  • Screen saved as bit map files

  • Transducer setup can be saved and emailed

 

Gageview

  • Two way communication of thickness and transducer setups

 

Panametrics-NDT Advantage

  • Unmatched measurement capability (Full control over Transducer Parameters)

  • Unmatched application support

  • Default or Custom setup for each application

  • Thickness, Velocity or Time of flight

  • Much smaller size